Mombamomba ny vokatra
● Ny rafitra tsindry sy ny fikorianan'ny ny servo tsindrona koronosy milina dia avo roa heny mihidy-loop, ary ny hydraulic rafitra manome solika araka ny tena mikoriana sy ny tsindry, izay maharesy ny angovo avo fanjifàna vokatry ny tosidra ambony ny mahazatra quantitative paompy rafitra .Ny maotera dia miasa araka ny hafainganam-pandeha napetraka ao amin'ny dingana avo lenta toy ny premolding, ny bobongolo fanakatonana sy ny lakaoly tsindrona, ary mampihena ny hafainganam-pandehan'ny maotera amin'ny ambaratonga ambany mikoriana toy ny tsindry fikojakojana sy ny hatsiaka.Ny maotera paompy menaka raha ny marina dia afaka Nihena 35% - 75% ny fanjifana.
● Ny tombony amin'ny milina fanodinkodinana servo, toy ny fitsitsiana angovo, ny fiarovana ny tontolo iainana, ny famerimberenana avo lenta, ny fahamendrehana ary ny faharetana, dia nankasitrahan'ny tsena ary nidera ny mpampiasa.
famaritana
| MODELY | HHF68X-J5 | Ampahany HHF110X-J5 | HHF130X-J5 | HHF170X-J5 | HHF230X-J5 | ||||||||||
| A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | |
| UNIT INJECTION | |||||||||||||||
| Savaivony visy | 28 (mm) | 30 (mm) | 32 (mm) | 35 (mm) | 38 (mm) | 42 (mm) | 38 (mm) | 42 (mm) | 45 (mm) | 40 (mm) | 45 (mm) | 48 (mm) | 45 (mm) | 50 (mm) | 55 (mm) |
| Screw L/D Ratio | 24.6 (L/d) | 23 (L/d) | 21.6 (L/d) | 24.6 (L/d) | 24.3 (L/d) | 22 (L/d) | 24.3 (L/d) | 22 (L/d) | 20.5 (L/d) | 24.8 (L/d) | 22 (L/d) | 20.6 (L/d) | 26.6 (L/d) | 23.96 (L/d) | 21.8 (L/d) |
| Haben'ny tifitra | 86 (cm3) | 99 (cm3) | 113 (cm3) | 168 (cm3) | 198 (cm3) | 241 (cm3) | 215 (cm3) | 263 (cm3) | 302 (cm3) | 284 (cm3) | 360 (cm3) | 410 (cm3) | 397 (cm3) | 490 (cm3) | 593 (cm3) |
| Lanja tsindrona (PS) | 78 (g) | 56 (g) | 103 (g) | 153 (g) | 180 (g) | 219 (g) | 196 (g) | 239 (g) | 275 (g) | 258 (g) | 328 (g) | 373 (g) | 361 (g) | 446 (g) | 540 (g) |
| tahan'ny tsindrona | 49 (g/s) | 56 (g/s) | 63 (g/s) | 95 (g/s) | 122 (g/s) | 136 (g/s) | 122 (g/s) | 150 (g/s) | 172 (g/s) | 96 (g/s) | 122 (g/s) | 138 (g/s) | 103 (g/s) | 128 (g/s) | 155 (g/s) |
| Plasticizing Capacity | 6.3 (g/s) | 8.4 (g/s) | 10.3 (g/s) | 11 (g/s) | 12 (g/s) | 15 (g/s) | 11 (g/s) | 14 (g/s) | 17 (g/s) | 16.2 (g/s) | 20 (g/s) | 21 (g/s) | 19 (g/s) | 24 (g/s) | 29 (g/s) |
| Tsindrona tsindrona | 219 (Mpa) | 191 (Mpa) | 168 (Mpa) | 219 (Mpa) | 186 (Mpa) | 152 (Mpa) | 176 (Mpa) | 145 (Mpa) | 126 (Mpa) | 225 (Mpa) | 178 (Mpa) | 156 (Mpa) | 210 (Mpa) | 170 (Mpa) | 140 (Mpa) |
| Vidin'ny visy | 0-220 (rpm) | 0-220 (rpm) | 0-220 (rpm) | 0-185 (rpm) | 0-185 (rpm) | ||||||||||
| CLAMPING UNIT | |||||||||||||||
| Clamp Tonnage | 680 (KN) | 1100 (KN) | 1300 (KN) | 1700 (KN) | 2300 (KN) | ||||||||||
| Toggle Stroke | 300 (mm) | 320 (mm) | 360 (mm) | 430 (mm) | 490 (mm) | ||||||||||
| Space Bet.Tie-bars | 310x310 (mm) | 370x370 (mm) | 430x415(415x415) (mm) | 480x480(470x470) (mm) | 532x532 (mm) | ||||||||||
| Max.Mold ny haavony | 330 (mm) | 380 (mm) | 440 (mm) | 510 (mm) | 550 (mm) | ||||||||||
| Min.Haavo lasitra | 120 (mm) | 140 (mm) | 140 (mm) | 170 (mm) | 200 (mm) | ||||||||||
| Ejector Stroke | 80 (mm) | 100 (mm) | 120 (mm) | 140 (mm) | 140 (mm) | ||||||||||
| Ejector Tonnage | 38 (Kn) | 45 (Kn) | 45 (Kn) | 45 (Kn) | 70 (Kn) | ||||||||||
| Ejector Number | 5 (PC) | 5 (PC) | 5 (PC) | 5 (PC) | 9 (PC) | ||||||||||
| HAFA | |||||||||||||||
| Fanerena Max | 16 (Mpa) | 16 (Mpa) | 16 (Mpa) | 16 (Mpa) | 16 (Mpa) | ||||||||||
| Pompeo Motor Power | 7.5 (Kw) | 11 (Kw) | 13 (Kw) | 15 (Kw) | 18.5 (Kw) | ||||||||||
| Heater Heater | 6.15 (Kw) | 9.8 (Kw) | 9.8 (Kw) | 11 (Kw) | 16.9 (Kw) | ||||||||||
| Dimension milina | 3.4x1.1x1.5 (m) | 4.2x1.15x1.83 (m) | 4,5x1,25x1,86 (m) | 5.1x1.35x2.1 (m) | 5.5x1.42x2.16 (m) | ||||||||||
| Lanja milina | 2.6 (T) | 3.4 (T) | 3.7 (T) | 5.2 (T) | 7 (T) | ||||||||||
| Cap Tank menaka | 140 (L) | 180 (L) | 210 (L) | 240 (L) | 340 (L) | ||||||||||
